Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Development kitDescription: Ethernet Development Tools Gigabit Ethernet Transceiver with RGMII - Evaluation Board94121+$2478.529910+$2455.997825+$2444.731850+$2433.4657100+$2422.1997150+$2410.9336250+$2399.6676500+$2388.4015 -
![]()
Category: Development kitDescription: BOARD EVALUATION FOR KSZ8873FLL18381+$3293.089810+$3263.152625+$3248.184050+$3233.2154100+$3218.2469150+$3203.2783250+$3188.3097500+$3173.3411 -
![]()
Category: Development kitDescription: KSZ8031RNL, PHY TXRX, EVAL BOARD; SVHC: No SVHC (18-Jun-2012) ; RoHS Compliant: Yes53061+$678.018410+$654.228350+$651.2545100+$648.2808150+$643.5227250+$639.3595500+$635.19621000+$630.4382 -
![]()
Category: Development kitDescription: Evaluation board for the KSZ8051 series. The KSZ8051/8031/8021 series is a low-power, small package 10 Base-T/100Base TX physical (PHY) layer transceiver that provides MII or RMII interfaces for transmitting and receiving data through standard CAT-5 unshielded twisted pair (UTP) cables or fiber optic cables, fully compliant with IEEE 802.3/802.3u standard single 3.3V power supply, with an internal 1.2V regulator and optional 3.3V, 2.5V, or 1.8V VDDIO integrated termination resistor on the chip for energy detection power-off mode when the cable is not inserted; And the 25MHz crystal in power-off/slow oscillator mode when the device is not in use, used for inputting reference clock HP automatic MDI/MDIX cross connection support based on LinkMD ® TDR Cable Diagnosis # # # Ethernet Communication - Microchip94861+$1398.912910+$1386.195525+$1379.836850+$1373.4781100+$1367.1194150+$1360.7607250+$1354.4020500+$1348.0433 -
![]()
Category: Development kitDescription: KSZ8851 The KSZ8851 series is a single-chip fast Ethernet controller that includes a 10/100 Base-T physical layer transceiver (PHY), MAC, and microprocessor interface. Integrated MAC and PHY Ethernet controller, fully compliant with IEEE 802.3/802.3u standard design for high-performance and high-throughput applications, supports 10Base-T/100Base TX, supports IEEE 802.3x full duplex flow control and half duplex backpressure conflict flow control, supports DMA slave burst data read and write transmission, supports IP socket (IPv4)/TCP/UDP/ICMP checksum generation and check, automatic 32-bit CRC generation and check, simple SRAM like host interface, can easily connect to the most common embedded MCU, supports multiple data frame transmission and reception, no address bus and byte enable signal, supports large byte order and small byte order processors, larger memory, 12KB for RX FIFO, 6KB for TX FIFO programmable low, high and overflow watermarks, used for Rx FIFO (FIFO) Efficient architecture design for flow control in, with configurable host interrupt scheme to minimize CPU overhead and utilization. Powerful and flexible address filtering scheme with a single 25MHz reference clock for PHY and MAC Ethernet communication - Microchip12211+$1224.726810+$1213.592925+$1208.026050+$1202.4590100+$1196.8921150+$1191.3252250+$1185.7582500+$1180.1913 -
![]()
Category: Development kitDescription: 10Base-T/100Base-TX Physical Layer Transceiver29561+$778.775010+$751.449650+$748.0339100+$744.6182150+$739.1532250+$734.3712500+$729.58921000+$724.1242 -
![]()
Category: development boardDescription: Evaluation Board for MIC28510 12V 75V/4A Hyper Speed Control™ DC/DC Regulator The Micrel MIC28510 is an adjustable frequency, synchronous buck regulator featuring unique adaptive on–time control architecture. Hyper Speed Control™ architecture enables High delta V operation (Vin = 75V and Vout = 0.8V) Small output capacitance 4.5V to 75V voltage input 4A output current capability, up to 95% efficiency Output voltage set at 12V ≤1% feedback accuracy Any Capacitor™ stable Zero-ESR to high-ESR output capacitors 100kHz to 500kHz switching frequency Internal compensation Foldback current-limit and hiccup mode short-circuit protection Thermal shutdown Supports safe startup into a pre–biased load ### Switching voltage regulator, Microchip99961+$383.929810+$373.914250+$366.2356100+$363.5648200+$361.5617500+$358.89091000+$357.22162000+$355.5524 -
![]()
Category: Development kitDescription: MICREL SEMICONDUCTOR KSZ8893MQL-EVAL Evaluation board for KSZ8893MQL23351+$3457.506810+$3426.074925+$3410.359050+$3394.6430100+$3378.9271150+$3363.2112250+$3347.4952500+$3331.7793 -
![]()
Category: Development kitDescription: MICREL SEMICONDUCTOR KSZ8895MQ-EVAL Evaluation Board, KSZ8895MQ, Ethernet SWITCH, 5 RJ45 Jacks for Ethernet LAN and WAN Interfaces56031+$3012.974810+$2985.584125+$2971.888850+$2958.1934100+$2944.4981150+$2930.8028250+$2917.1074500+$2903.4121 -
![]()
Category: Development kitDescription: MICREL SEMICONDUCTOR KSZ8873MML-EVAL Evaluation Board, 3Port, 10/1000Mbps Switch System, 2KB Packet Size64121+$3632.128510+$3599.109225+$3582.599550+$3566.0898100+$3549.5801150+$3533.0705250+$3516.5608500+$3500.0511 -
![]()
Category: Development kitDescription: BOARD EVALUATION FOR KSZ8041RNL75721+$972.587610+$938.461750+$934.1960100+$929.9302150+$923.1051250+$917.1330500+$911.16101000+$904.3358 -
![]()
Category: development boardDescription: Evaluation Board for MIC22705YML 7A Integrated Switch Synch Step-Down Regulator Input voltage range: 2.9V to 5.5V Output voltage adjustable down to 0.7V Output load current up to 7A Safe start-up into a pre-biased load Full sequencing and tracking capability Power Good output Efficiency > 95% across a broad load range Ultra-fast transient response Easy RC compensation 100% maximum duty cycle Fully-integrated MOSFET switches Thermal-shutdown and current-limit protection ### 开关电压调节器，Microchip1045 -
![]()
Category: development boardDescription: Evaluation Board for MIC23250 4MHz Dual 400mA Synch Step-Down Regulator The MIC23250 is a high efficiency 4MHz dual 400mA synchronous buck regulator with HyperLight Load® mode. Input voltage range: 2.7V to 5.5V Dual output current 400mA / 400mA Up to 94% peak efficiency and 85% efficiency at 1mA 33μA dual quiescent current 1μH inductor with a 4.7μF capacitor 4MHz in PWM operation Ultra fast transient response Low voltage output ripple 20mVpp in HyperLight Load® mode 3mV output voltage ripple in full PWM mode 0.01μA shutdown current ### 开关电压调节器，Microchip1716 -
![]()
Category: development boardDescription: Evaluation Board for MIC26603YJL 28V 6A HyperLight Load® DC/DC Regulator The Micrel MIC26603 is a constant-frequency, synchronous DC/DC buck regulator featuring adaptive on-time control architecture. HyperLight Load® efficiency - up to 80% at 10mA Hyper Speed Control™ architecture enables High delta V operation (Vin = 28V and Vout = 0.8V) Small output capacitance Input voltage range: 4.5V to 28V Output current up to 6A Up to 95% efficiency Adjustable output voltage from 0.8V to 5.5V ±1% feedback accuracy Any Capacitor™ stable - zero-to-high ESR 600kHz switching frequency Power Good (PG) output Foldback current-limit and "hiccup" mode short-circuit protection Safe start-up into pre-biased loads ### 开关电压调节器，Microchip5398 -
![]()
Category: development boardDescription: Evaluation Board for MIC261203YJL 28V 12A HyperLight Load® DC/DC Regulator HyperLight Load® efficiency - up to 80% at 10mA Hyper Speed Control™ architecture enables High delta V operation (Vin = 28V and Vout = 0.8V) Small output capacitance Input voltage range: 4.5V to 28V Output current up to 12A Up to 95% efficiency Adjustable output voltage from 0.8V to 5.5V ±1% feedback accuracy Any Capacitor™ stable - zero-to-high ESR 600kHz switching frequency Power Good (PG) output Foldback current-limit and "hiccup" mode short-circuit protection Safe start-up into pre-biased loads ### 开关电压调节器，Microchip5055
